Get Quote Catalog

Ask The Service Department: Technical Questions

How to transfer programs using USB?

Machine is S024-4×60 with Fagor 8055I controller. We are trying to save programs to USB flash drive, but the machine does not recognize USB flash drive. How do we save and transfer programs to and from using a USB flash drive?

  1. Andrew,

    You want to make sure that the USB device you are using is a basic USB stick. If it is one of the larger more expensive USB sticks that have drivers it can cause issues trying to load and unload. If that does not fix it, the USB may have come loose behind the control. You can remove the bolts around the face of the control and pull it out. You will then see the USB cable going from the board out the USB input. This should resolve your issue. If not, feel free to call us at 1-800-654-3262 ext. 140.

Summit Machine Tool
Contact Us

Summit Machine Tool
518 N Indiana Ave
Oklahoma City, OK 73106

Toll Free: (800) 654-3262
Local: (405) 235-2075
Fax: (405) 232-5169
Contact Form