Get Quote Catalog

39″ Euro Hollow Spindle Oil Country Metal Lathes

14.1″ Spindle Bore, Center Distances: 60″ to 240″

Request a Quote   Download a Brochure

The Summit Euro 39” Oil Country Hollow Spindle Lathe Series is designed to provide the precision you expect and the reliability required for today’s demanding applications. The Summit Euro 39” Lathes are available in center distances from 60” to 240”, with spindle bores of 10”, 12” and 14” to cover a wide range of work pieces.

The quick change gearbox allows easy selection of Inch, Metric and Module threads in a wide range of sizes. The headstock is designed with straight cut final drive gears that provide quiet and efficient operation through the full range of spindle speeds. The huge forged spindles are mounted in precision angular contact spindle bearings for axial and radial load.

The bed of the is constructed from high grade alloyed cast iron, normalized and aged to achieve maximum stability. It is also designed for rear chip discharge and the lathe comes standard with chip and coolant pans for easy chip removal. This lathe series features castings that are heavily ribbed for rigidity and vibration dampening. The extra wide (22”) bed ways are hardened and precision ground to provide accuracy and long life.

The Summit Euro 39″ Oil Country Lathes come standard with front and rear chucks with sliding chuck guards, steady rest, follow rest, complete coolant system with chip pans, full length splash guard, and a taper attachment incremented in both degrees and inches per foot. These lathes are also fitted with a hydraulic rapid tool retract device for semi-automatic threading.

  • Big 14.1″ thru hole
  • Inch/metric threads w/ single switch lever
  • Cuts most inch/metric threads without change gears
  • Hardened & precision ground bedways
  • Forced lubrication to the headstock, carriage and bedways
  • Removable gap
  • Precision (3) bearing spindle
  • Crossfeed and threading safety interlock
  • Feed reversing at the apron
  • 4-way rapid traverse
  • Two speed tailstock
  • Sliding Chuck Guards
Included Accessories
  • Standard Steady Rest ( 7″ to 16.9″)
  • Follow rest
  • Thread dial
  • Coolant system
  • taper attachment
  • Hydraulic rapid threading device
  • Front & rear 4 jaw chucks (28″)
  • Carriage stop
  • Work light
  • Full length splash guard
  • Service wrenches & spanners
Specifications: 39″ Swing Series
Capacities
Swing over bed 39.5″
Swing over cross slide 29.9″
Swing over gap 47.25″
Headstock
Hole thru spindle – available sizes 14.1″
Spindle speeds (12) 9.6-460 rpm
Spindle nose A 2-20
Tailstock
Travel of spindle barrel 18.8″
Diameter of spindle barrel 4.1″
Tailstock center #6 MT
Bed
Width of bed 22″
Motor
Main drive motor 30 HP
Miscellaneous
Shipping weight (approximate) 18,700 lbs.
Summit Machine Tool
Contact Us

Summit Machine Tool
518 N Indiana Ave
Oklahoma City, OK 73106

Toll Free: (800) 654-3262
Local: (405) 235-2075
Fax: (405) 232-5169
Contact Form